Extraction of fat/oil from fleshing by-product using a wet rendering process and combination with organic solvents

Sugihartono Sugihartono; Dona Rahmawati; Ageng Priatni; Efa Radnawati

doi:10.20543/mkkp.v35i1.4629

Extraction of fat/oil from fleshing by-product using a wet rendering process and combination with organic solvents

Sugihartono Sugihartono, Dona Rahmawati, Ageng Priatni, Efa Radnawati

Abstract

The extraction of fat/oil from fleshing by-products using moist heating (boiled and steamed) produces a fat that contains large amounts of impurities and which is bluish color, whereas when using fatty solvents, it is necessary to dry the ingredients. The purpose of this study was to determine the fat/oil characteristics from fleshing by-products extracted using a combination of wet rendering (temperatures of 80, 90 and 100 °C, and times 1, 2 and 3 hours) with n-hexane. The combined treatment of wet rendering (temperature 90 °C and duration 2 hours) with n-hexane gave rise to the production of fat with the highest yield (11.10% w/w). The higher the temperature and the longer the wet rendering process, results in fat with higher levels of free fatty acid and the saponification value, but the lower the number of peroxides and the darker the color. The fats/oils consist of 37 fatty acid compounds, composed of saturated and unsaturated fatty acids. There are six very present fatty acid compounds, namely butyric acid methyl ester, tetradecanoic acid methyl ester, cis-10-pentadecanoic acid methyl ester, palmitoleic acid methyl ester, octadecanoic acid methyl ester and trans-9-elaidic acid methyl ester.

Full Text:

PDF

References

AOAC. (2005). Official methods of analysis of the association of analytical chemists international. 18th ed. Gathersburg: MD U.S.A Official methods.

Aziz, T., Cindo K. N., & Asima, F. (2009). Pengaruh pelarut heksana dan etanol, volume pelarut, dan waktu ekstraksi terhadap hasil ekstraksi minyak kopi. Jurnal Teknik Kimia, 16(1), 1–8.

Cuq, M. H. B., Mlayah, B., & Delmas, M. (1998). Oil extracted from seal hides: Characterization and use as leather fatliquor. Journal of the American Oil Chemists’ Society, 75(8), 1015–1019. https://doi.org/10.1007/s11746-998-0280-8

Derlean, A. (2009). Pengaruh suhu dan lama pemanasan terhadap kerusakan minyak kelapa. Jurnal MIPA, Kependidikan dan Terapan, 1(1), 19–26.

Handayani, P. A., & Juniarti, E. R. (2012). Ekstraksi minyak ketumbar (coriander oil) dengan pelarut etanol dan N-heksana. Jurnal Bahan Alam Terbarukan, 1(1), 1–7.

IUE-2. (2008). Recomendation for Tannery Solid by Product Management.

Kanagaraj, J., Velappan, K. C., Chandra Babu, N. K., & Sadulla, S. (2006). Solid wastes generation in the leather industry and its utilization for cleaner environment - A review. Journal of Scientific and Industrial Research, 65(7), 541–48. https://doi.org/10.1002/chin.200649273

Karouw, S., & Indrawanto, S. (2015). Perubahan mutu minyak kelapa dan minyak sawit selama penggorengan. Buletin Palma, 16(1), 1–7.

Ketaren. (1986). Pengantar teknologi minyak dan lemak pangan. UI-Press Jakarta.

Panagan, A. T., Yohandini, H., & Gultom, J. U. (2011). Analisis kualitatif dan kuantitatif asam lemak tak jenuh omega-3 dari minyak ikan patin (Pangasius pangasius) dengan metoda kromatografi gas. Jurnal Penelitian Sains, 14(4), 38–42.

Prayitno. (2017). Teknologi bersih proses penyamakan kulit. Yogyakarta: Grafika Indah.

Priebe, G. P. S., & Gutterres, M. (2012). Olein production from pre-fleshing residues of hides in tanneries. Latin American Applied Research, 42, 71–76.

Rukmini, A., & Raharjo, S. (2010). Pattern of peroxide value changes in virgin coconut oil (VCO) due to photo-oxidation sensitized by chlorophyll. Journal of the American Oil Chemists’ Society, 87(12), 1407–1412. https://doi.org/10.1007/s11746-010-1641-7

Sahriawati, & Daud. (2016). Optimasi proses ekstraksi minyak ikan metode soxhletasi dengan variasi jenis pelarut dan suhu berbeda. Jurnal Galung Tropika, 5(3), 164–70.

Siswanto, W., & Mulasari, S. A. (2015). Pengaruh frekuensi penggorengan terhadap peningkatan peroksida minyak goreng curah dan fortifikasi vitamin A. Jurnal Kesmas, 9(1), 1–10.

Sopianti, D. S., Herlina, & Saputra, H. T. (2017). Penetapan kadar asam lemak bebas pada minyak goreng. Jurnal Katalisator, 2(2), 100–105.

Supangat, I. (1976). Dasar-dasar kimia organik. Yogyakarta: Yayasan Penerbit FPMIPA-IKIP.

Susanti, C. M., Sugiharto, R., Setyani, R., & Subekti. (2014). Pengaruh jumlah pelarut etanol dan suhu fraksinasi terhadap karakteristik lemak kakao hasil ekstraksi non alkalized cocoa powder. Jurnal Teknologi Industri Dan Hasil Pertanian, 19(2), 307–19.

Sutyasmi, S., Sunaryo, I, & Suraswati, A. (2006). Teknologi pengambilan lemak dari sisa fleshing. Majalah Kulit, Karet, dan Plastik, 22(1), 32–37. https://doi.org/10.20543/mkkp.v22i1.333

Vogel. (1984). Textbook of practical organic chemistry. ELBS Editi. Great Britain: William Clowes Elmited.

White, A., Handler, P ., & Smith, E. L. (1964). Principles of biochemistry. Edited by Mc Grow-Hill Book. 3rded. New York, Toronto, London: Kogakusha Company LTD Tokyo.

DOI: http://dx.doi.org/10.20543/mkkp.v35i1.4629