Studi Performansi Mesin Pelontar Pakan Ikan terhadap Gaya Sentrifugal

Perdana Putra Kelana; Rizqi Ilmal Yaqin; Rangga Bayu Kusuma Haris; Alfakhri Alfakhri; A Marsha Alviani

doi:10.26578/jrti.v15i2.6934

Studi Performansi Mesin Pelontar Pakan Ikan terhadap Gaya Sentrifugal

Perdana Putra Kelana, Rizqi Ilmal Yaqin, Rangga Bayu Kusuma Haris, Alfakhri Alfakhri, A Marsha Alviani

Abstract

The fish feed thrower machine can disperse the feed over a wide coverage area in a short time. Throw distance is an important parameter that must be considered in a fish feed thrower machine. Distribution of feed from the fish feed thrower machine is due to the centrifugal force. This study aims to analyze the rotational speed (RPM) of the fish feed thrower machine 360° against throw distance and centrifugal force of the feed grains. Maximum results obtained for throw distance, throw speed and centrifugal force occur at RPM 600. Farthest throw distances from the feed codes 781-1, 781 and 782 are 2.20 m, 1.89 m and 1.66 m. Maximum throw speeds of the feed codes 781-1, 781 and 782 are 14,667 m/s, 12,583 m/s and 11,083 m/s. Maximum centrifugal force of the feed codes 781-1, 781 and 782 are 0.504x10^-3 N, 2.711x10^-3 N and 5.796x10^-3 N. This shows that the centrifugal force on the feed grains causes the rotational speed (RPM) to affect the distance and speed of the feed.

Keywords

Aquaculture, fish, fish feed thrower machine, centrifugal

Full Text:

PDF (Indonesian)

References

Alviani, A. M., Nugroho, S. D., & Yaqin, R. I. 2020. Rancang Bangun Autofeeder Dengan Pelontar Berbahan Poly Vinil Chloride (PVC) Untuk Tambak Udang. Coastal and Ocean Journal, 4(2), 83–88.

Alviani, A. M., Sutrisno, & Dinata, I. 2020. Studi Tata Letak Dan Jarak Lontar Autofeeder Di Cv Putra Gunung Sari Segara Desa Lelateng Kecamatan Negara Kabupaten Jembrana Provinsi Bali. Coastal and Ocean Journal, 4(2), 63–68.

Husairy, A., & Leonanda, B. D. 2014. Simulasi Pengaruh Variasi Kecepatan Inlet Terhadap Persentase Pemisahan Partikel Pada Cyclone Separator Dengan Menggunakan CFD. Jurnal Rekayasa Sipil, 10(1), 12–21.

Ilham, F., Hiron, N., & Busaeri, N. 2020. Mesin Dispenser Pakan Otomatis Hemat Energi. Journal of Energy and Electrical Engineering (JEEE), 1(2), 43–47.

Lusi, N., Afandi, A., & Utami, S. W. 2020. Peningkatan Kapasitas Dan Efisiensi Pemberian Pakan Ikan Melalui Teknologi Fish Feeder Pada Masyarakat Dusun Paiton Desa Parijatah Kulon. Widya Laksana, 9(2), 125–134.

Nurfauzan, M. F., Santi, S., Rahmawati, S. N., & Sari, M. G. 2018. Uji Kecepatan Sesaat Melalui Gerak Parabola Menggunakan Software Tracker Pada Permukaan Gesek. Journal of Teaching and Learning Physics, 3(1), 11–17.

Osueke, O. ., Olayanju, T. M. ., Onokwai, A. ., & Uzendu, P. 2018. Design And Construction Of An Automatic Fish Feeder Machine. International Journal of Mechanical Engineering and Technology, 9(2018), 1631–1645.

Prasetyo, E., Libyawati, W., & Kurniawan, Y. 2015. Desain Alat Pengumpan Pakan Ikan Otomatis bagi Industri Pembiakan Ikan Air Tawar. Seminar Nasional Rekayasan Material, Sistem Manufaktur Dan Energi, 68–74.

Prijatna, D., Handarto, H., & Andreas, Y. 2018. Rancang Bangun Pemberi Pakan Ikan Otomatis. Jurnal Teknotan, 12(1).

Remen, M., Oppedal, F., Imsland, A. K., Olsen, R. E., & Torgersen, T. 2013. Hypoxia tolerance thresholds for post-smolt Atlantic salmon: Dependency of temperature and hypoxia acclimation. Aquaculture, 416–417, 41–47.

Salin, K. R., & Arome Ataguba, G. 2018. Aquaculture and the Environment: Towards Sustainability. In F. I. Hai, C. Visvanathan, & R. Boopathy (Eds.), Sustainable Aquaculture (pp. 1–62).

Sifa, A., Endramawan, T., & Badruzzaman, B. 2019. Pengujian Performansi Mesin Pelontar Pakan Ikan Otomatis. 10th Industrial Research Workshop and National Seminar, 53–58.

Sirait, R. 2018. Pengaruh Massa Terhadap Kecepatan dan Percepatan berdasarkan Hukum II Newton Menggunakan Linier Air Track. Jurnal Ilmu Fisika Dan Teknologi, 2(2), 11-17.

Sukarni, Abdurrachman, M., Prasetiyo, A., Permanasari, A. A., Puspitasari, P., & Suryanto, H. 2021. Rancang Bangun TTG I-Bite (IoT Basic Automatic Smart Feeder) untuk Meningkatkan Kapasitas Produksi Tambak Ikan Lele. Jurnal Karinov, 4(1), 13–17.

Tamrin, Lanya, B., Oktafri, & Wibisono, R. A. 2018. Pengembangan Alat Penebar Pakan Ikan Dengan. Perteta, 136–144.

Uddin, M., Rashid, M., Mostafa, M., Salam, S., Nithe, N., Rahman, M., & Aziz, A. 2016. Development of an Automatic Fish Feeder. Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering, 16(2), 11.

DOI: http://dx.doi.org/10.26578/jrti.v15i2.6934