REKAYASA PEMBUATAN MESIN STRIP BAMBU

Anhar Firdaus, Miyono Miyono

Abstract


Bamboo is one of non-timber forest products that has been utilized for various purposes. One of its utilizations, as building materials, is in terms of shape and strips. However, with the rapid advancement of gluing technology, bamboo can be used as a raw material for plywood core substitution as veneer. The purpose of this research is to produce a machine strips of bamboo slats with thick uniform size that can be set suit. Before introduced to the stripper machine, bamboo stems must first be cut or thinned into the desired size. The symmetrical bamboo slats are then fed into the thinning machine using a bamboo carrier U-shaped device made of iron that leads to roll clamp. At the last roll, a steel blade is in place to divide and thin the bamboo slats. The upper roll clamp serves to clamp and press the bamboo slats. Rendement the average results of the cleavage 1 (one) sized bamboo rod 8 mm thick, 1.5 cm wide and 30 cm long with a volume of 216 cm3 based on the size of the bamboo strips obtained material thickness of 1 mm by 31.5 cm3 (7 strips) or about 14, 58%,, bamboo strip thickness of 1.5 mm by 74.25 cm3 (11 strips) or about 34.375%, and a thickness of 2 mm bamboo strips as 117 cm3 (13 strips) or approximately 54.17%.

Keywords:  bamboo, strip, thinning, machines, knife, motors


Full Text:

PDF

References


Edward L. Paul, Victor A. Atiemo-Obeng, Suzanne M. Kresta, 2004. Handbook of Industrial Mixing: Science and Practice. John Wiley & Sons, Inc., Hoboken, New Jersey, United States of America.

Krisdianto, Ginuk Sumarni dan Agus Ismanto, 2005. Sari Hasil Penelitian Bambu. Departemen Kehutanan RI. (http://www.dephut.go.id/index.php?q=id/node/1241 diakses 12 Agustus 2007).

Rachman Effendi, 2007. Kajian Sistem dan Kebutuhan Bahan Baku Industri Pengolahan Kayu di Kalimantan Selatan. Info Sosial Ekonomi. 7 (4). Bogor.

Ridwanti Batubara, 2002. Pemanfaatan Bambu di Indonesia. Fakultas Pertanian, Program Ilmu Kehutanan, Universitas Sumatra Utara. (http://library.usu.ac.id/download/fp/hutan-ridwanti4.pdf diakses 25 Mei 2007).

SOLIH ROKYANA, 2000. Perhitungan Konstruksi Mesin 2. Bidang Keahlian Teknik Mesin, Amico. Bandung.

Sunyoto, Karnowo, S. M. Bondan Respati, 2008. Teknik Mesin Industri Jilid 1 untuk SMK, Direktorat Pembinaan Sekolah Menengah Kejuruan, Direktorat Jenderal Manajemen Pendidikan Dasar dan Menengah, Departemen Pendidikan Nasional, 204 halaman. Jakarta.

Solih Rokyana. 2000. Perhitungan Konstruksi Mesin 2. Bidang Keahlian Teknik Mesin, Amico. Bandung.

Yanuarianto, 2000. Peningkatan Kinerja Mesin Pemotong Batu Aji. Baristand Indag Banjarbaru. Banjarbaru.




DOI: http://dx.doi.org/10.24111/jrihh.v5i2.1217

Refbacks

  • There are currently no refbacks.




JRIHH INDEXED BY :

       
       


Published by BARISTAND INDUSTRI BANJARBARU (E-ISSN: 2503-0779 dan P-ISSN : 2086-1400).

 Creative Commons License