TINJAUAN MENGENAI PENERAPAN FISIKA PLASMA PADA BIDANG TEKSTIL

Valentinus Galih Vidia Putra, Tri Susanto

Abstract


Dalam beberapa tahun terakhir, penggunaan fisika plasma telah menarik beberapa peneliti di industri tekstil untuk dipelajari, dikarenakan teknologi ini dapat menghemat biaya produksi dan adanya sifat ramah lingkungan sehingga penerapan fisika plasma dapat diimplementasikan dalam berbagai proses tekstil. Artikel ini bertujuan untuk memberikan gambaran umum tentang penerapan plasma korona non-termal dalam industri tekstil. Efisiensi pengolahan plasma korona dipengaruhi oleh beberapa karakteristik antara lain sifat bahan tekstil, jenis pembangkit plasma korona, dan kondisi perlakuan plasma korona. Namun meskipun begitu, penerapan fisika plasma pada tekstil belum sepenuhnya dipelajari serta dimanfaatkan secara maksimal. Karena banyaknya aplikasi plasma korona di bidang industri tekstil, maka pada artikel ini diulas tentang pengaruh perlakuan plasma dan penerapan plasma, terutama oleh plasma korona, terhadap bahan tekstil.


Keywords


Fisika, industri, material tekstil, plasma.

Full Text:

PDF (Indonesian)

References


Amril, H. (2015). Teknologi Plasma untuk Pengolahan Air. Bandung: Jurusan teknik Kimia, Institut Teknologi Bandung.

Buyle, G. (2009). Nanoscale finishing of textiles via plasma treatment . Materials Technology, 24:46–51.

Chan, C., Ko, T., & Hiraoka, H. (1996). Polymer surface modification by plasmas and photons. Surf Sci Rep, 1-54.

Chen, F. F. (1984). Introduction to Plasma Physics and Controlled Fusion. New York: Plenum Press.

Ferrero, F. (2003). Wettability measurements on plasma treated synthetic fabrics by capillary rise method. Polym Test, 22:571–578.

Fridman, G., Friedman, G., Gutsol, A., Shekhter, A. B., Vasilets, V. N., & Fridman, A. (2008). Applied Plasma Medicine. Plasma Processes Polym, 503-533.

Goldston, R. J., & Rutherford, P. H. (1995). Introduction to Plasma Physics. London: Ionstitute of Physics Publishing.

Grace, J., & Gerenser, L. (2003). Plasma treatment of polymers. J Dispersion Sci Technol , 24:305–341.

Gupta, B., Hilborn, J., Hollenstein, C., & al., e. (2000). Surface modification of polyester films by RF plasma. J Appl Polym Sci, 78:1083–1091.

Hamdani, M. (2019). Studi Pengaruh Perlakuan Plasma Pijar Korona Tip Silinder terhadap Daya Serap Kain TC. Bandung: Politeknik STTT Bandung.

Heinlin, J., Isbary, G., Stolz, W., Morfill, G., & et.al. (2010). Plasma applications in medicine with a special focus on dermatology. JEADV, 25:1-11.

Kaiser, M., Baumgartnet, K. M., Schultz, A., Walker, M., & Rauchle, E. (1999). Linearly extended plasma source for large-scale applications. Surf Coat Technol, 552-557.

Kang, J., & Sarmadi, M. (2004). Plasma treatment of textiles: synthetic polymer-based textiles. AATCC Rev , 4:29–33.

Laroussi, M. (1996). Sterilization of contaminated matter with an atmospheric pressure plasma. IEEE T Plasma Sci, 1188-91.

Laroussi, M. (2002). Non‐Thermal Decontamination of Biological Media by Atmospheric Pressure Plasmas: Review, Analysis, and Prospects. IEEE Trans. Plasma Sci, 1409.

Laroussi, M. (2018). Plasma medicine: a brief introduction. Plasma, 5.

Laroussi, M., & Xandkeidar, M. L. (2017). Perspective: the physics, diagnostics, and applications of atmospheric pressure low temperature plasma sources used in plasma medicine. Journal of Applied Physics, 020901.

Leroux, F., Perwuelz, A., & Campagne, C. (2006). atmospheric air-plasma treatments of polyester textile structures. J Adhes Sci Technol, 939.

Lieberman, M., & Lichtenberg. (1994). Principles of Plasma Discharges and Materials Processing. New York: John Wiley and Sons.

Marcandalli, B., & Riccardi, C. (2007). Plasma Treatments of Fibres and Textiles in Plasma Technology for Textile. Cambridge, England: Woodhead Publishing Limited.

Matthews, S., Hwang, Y., & al, M. M. (2004). investigation into etching mechanism of polyethylene terephthalate (PET) films treated in helium and oxygenated-helium atmospheric plasma. J Appl Polym Sci , 94:2383–2389.

Morent, R., Geyter, N. D., Verschuren, J., Clerk, K. D., Kiekens, P., & Leys, C. (2008). Non-thermal Plasma Treatment of Textiles. Surf. Coat. Technol, 3427-3449.

Morra, M., Occhiello, E., & Garbassi, F. (1989). Contact angle hysteresis on oxygen plasma treated polypropylene surfaces. J coiloid Interface Sci , 132:504–508.

Murti, W., & Putra, V. G. (2020). Studi Pengaruh Perlakuan Plasma TerhadapSifat Material AntiBakteri Kain Kassa Menggunakan Minyak Atsiri (Zingiber Officinale Rosc). Jurnal Teori dan Aplikasi Fisika, 69-76.

Nawalakhe, R., Shi, Q., Vitchuli, N., & al, e. (2013). Novel atmospheric plasma enhanced chitosan nanofiber/gauze composite wound dressings. Journal of Applied Polymer Sciences, vol. 129, issue 2, pp 916–923.

Nawalakhe, R., Shi, Q., Vitchuli, N., Noar, J., Caldwell, J. M., Bredt, F., & McCord, M. (1996). Novel atmospheric plasma enhanced chitosan nanofiber/gauze composite wound dressings. Journal of Applied Polymer Science, 916-923.

Paosawatyanyong, B., & Hodak, S. (2010). Hydrophobic and Hydrophilic Surface Nano-Modification of PET Fabric by Plasma Process. Journal of Nanoscience and Nanotechnology, Vol. 10, 7050–7054.

Prat, R., Shi, M., & Clouet, F. (1997). Interactions of cold plasmas with polymers and their model molecules: degradation vs functionalization. J Macromol Sci A , 34:471–488.

Pratama, A. Y. (2020). Studi Modifikasi Permukaan Kain Tenun Anyaman Polos Tc (75 : 25) Dengan Pelapis Karbon Untuk Pembuatan Material Anti Radiasi Menggunakan Treatment Plasma Pijar Korona Multi Titik-Bidang. Bandung: Politeknik STTT Bandung.

Putra, V. (2019). Bahan Ajar Mata Kuliah Mekatronika Tekstil. Bandung: Politeknik STTT Bandung.

Putra, V. G., & Wijayono, A. (2019). A preliminary study of wetting properties on 100% polyester fabric using corona discharge plasma, (in: Suatu Studi Awal Modifikasi Sifat Pembasahan Pada Permukaan KainTekstil Poliester 100% Menggunakan Teknologi Plasma Pijar Korona). Prosiding Seminar Nasional Fisika (E-Journal), 15-20.

Putra, V. G., Mohamad, J. N., & Yusuf, Y. (2020). Study Of Surface Tension Properties Looked On Contact Angle Value On 100% Nylon Textile Fabric Using Corona Discharge Plasma Technology. Wahana Fisika, 10-17.

Putra, V. G., Mohamad, J., & Wijayono, A. (2020). Efek Modifikasi Plasma Untuk Meningkatkan Sifat Tahan Api Dari Kain Katun. Jurnal Dinamika Penelitian Industri 31 (1), 59-70.

Putra, V., Fitri, A., Purnama, I., & Mohamad, J. (2020). Prototipe Pakaian Anti Radiasi Unisex Sportswear. Jurnal Kumparan Fisika, 19-24.

Putra, V., Mohamad, J., & Yusuf, Y. (2020). Penerapan Gelombang Plasma dalam Mengurangi Kadar Chemical. Jurnal Ilmu Fisika, 60-69.

Rauscher, Perucca, & Buyle. (2003). Plasma Technology For Hyperfunctionals Surfaces. Weinheim: Wiley-VCH.

Sakudo, A., & Shintani, H. (2010). Sterilization and Disinfection by Plasma: Sterilization Mechanisms, Biological and Medical Applications (Medical Devices and Equipment). New York: Nova Science Publishers.

Shahidi, S. (2013). Novel method for ultraviolet protection and flame retardancy of cotton fabrics by low-temperature plasma. Cellulose., 21(1): 757–768.

Shahidi, S., & Ghoranneviss, M. (2013). Effect of Plasma Pretreatment Followed by Nanoclay Loading on Flame Retardant Properties of Cotton Fabric. Journal of Fusion Energi, 33(1): 88–95.

Shahidi, S., Wiener, J., & Ghoranneviss, M. (2013). Surface modification methods for improving the dyeability of textiles fabrics . Dalam G. M. (ed), Eco-friendly textile dyeing and finishing (hal. pp 33–52). Rijeka: InTech.

Shishoo. (2007). Plasma Technology For Textile. Cambridge: Woodhead Publishing.

Stoffels, E., Flikweert, A., Stoffels, W., & Kroesen, G. (2002). Plasma Needle: A non‐destructive Atmospheric Plasma Source for Fine Surface Treatment of Biomaterials. Plasma Sources. Sci. Technol, 383.

Susan, A., Sjaifudin, & et.al. (2016). Kajian Kelistrikan Plasma Pijar Korona Menggunakan Elektroda Multi Titik Bidang Dalam Perlakuan Tekstil. Arena Tekstil 31(1), 11-16.

Susan, A., Widodo, M., & Nur, M. (2017). Corona Glow Discharge Plasma Treatment for Hidrophycility Improvement of Polyester and Cotton Fabrics. IOP Conference Series Material Science and Engineering , IOP Publishing 012031 doi:10.1088/1757899X/214/1/012031.

Taylor, G., & Wolf, T. (1980). Oxygen plasma removal of thin polymer films. Polym Eng Sci , 20:1087–1092.

Tendero, C., Tixier, C., & Tristant, P. e. (2006). Atmospheric pressure plasmas: a review. Spectrochim Acta B, 61:2-30.

Thurston, M., Clay, D., & Schulte, D. (2007). Effect of atmospheric plasma on polymer surface energi and adhesion. J Plast Film Sheeting , 23:63–78.

Vesel, A., Mozetic, M., & Strnad, S. e. (2010). Plasma modification of viscose textile. Vacuum, 79.

Wang, C., Du, M., & Qui, Y. (2011). Uniformity and penetration of surface modification effects of atmospheric pressure plasma jet into textile materials. Adv Mater Res , 331:356–359.

Wangness RK., (1979), Electromagnetic Fields, New York John Wiley &Sons

Yasuda, H., Sharma, A., & Yasuda, T. (1981). J Polym Sci Polym Phys. Effect of orientation and mobility of polymer molecules at surfaces on contact angle and its hysteresis, 19:1285–1291.

Yun, Y., Kim, K., Uhm, S., & al., e. (2004). Aging behavior of oxygen plasma-treated polypropylene with different crystallinities. J Adhes Sci Technol , 18:1279–1291.

Zaenul, M., Dhyan, P., Herli, D. M., & et.al. (2017). Pembangkitan Lucutan Pijar Korona Negatif Pada Kondisi Atmosfer Dan Pengaruhnya Terhadap Resapan Air Pada Kain Katun Dan Poliester Grey. Arena Tekstil, Vol. 32 No. 87-92.

Zeuner, M., Meichsner, J., & Poll, H. (1995). Oxidative decomposition of polymethylmethacrylate (PMMA) in plasma etching. Plasma Sources Sci Technol , 4:406–415.

Zulfikar, L. (2019). Studi Pembuatan Benang Konduktor Dengan Metode Pelapisan (Coating) Pada Benang Poliester Dengan Perlakuan Plasma Pijar Korona Tip-Plane. Bandung: Politeknik STTT Bandung.




DOI: http://dx.doi.org/10.28959/jdpi.v32i1.6683

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Jurnal Dinamika Penelitian Industri

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.