PENGARUH ARANG AKTIF BAMBU TERHADAP KARAKTERISTIK PEMATANGAN DAN SIFAT MEKANIK KARET PEREDAM GONCANGAN KENDARAAN BERMOTOR

Bambang Sugiyono, Hari Adi Prasetya

Abstract


The research on the utilization of bamboo activated charcoal as a filler for sport damper has been done. This study aims to obtain the best formula of motor vehicle sport damper with bamboo activated charcoal filler and to examine the characteristics of the resulting sport damper. The design is Completely Randomized Design (RAL) non factorial, each treatment repeated three times, by treatment of B1 (activated charcoal concentration 20 phr), B2 (activated charcoal concentration 30 phr), B3 (activated charcoal concentration 40 phr ), B4 (activated charcoal concentration 50 phr) and B5 (activated charcoal concentration 60 phr). The parameters observed were characteristic of vulcanization of rubber compound sport damper, ie optimum vulcanization rate (t90), pravulcanisation time (ts2) and torsion modulus (ML and MH) and mechanical characteristics, ie tear resistance and compression set. The results showed that all treatments had a significant effect on the characteristics of vulcanization and mechanical characteristics of sport damper. The best treatment of motor vehicle sport damper obtained of B3, B4 and B5, with characteristics characteristic is fulfill of commercial sport damper.  The bamboo activated charcoal can be used as a filler for rubber products and can be used as an alternative to commercial fillers.


Keywords


bamboo activated charcoal, characteristics, sport damper

Full Text:

PDF (Indonesian)

References


Ahmad. A, Mohd. DH and Abdullah. I. (2004). Mechanical properties of filled NR/LLDPE blends, Iranian Polymer Journal. 13(3) : 173-178.

Ahmed, K., Sirajuddin, S.N., Raza, N.Z., dan Shirin, K. (2012). Cure Characteristics, Mechanical and Swelling Properties of Marble Sludge Filled EPDM Modified Chloroprene Rubber Blends. Advances in Materials Physics and Chemistry. 2 : 90-97.

AL-Nesrawy, S.H. (2014). Effect of mixture of reclaimed tire and carbon black percent on the mechanical properties of SBR/NR blends. International Journal Advantage Research. 2 : 234-243.

Bonelli, P.R., Rocca, P.A.D., Cerrela, E.G., and Cukierman, A.L. (2001). Effect of pyrolysis temperature on composition, surface properties, and thermal degradation rates of Brazil nut shell. Bioresource Technology. 76:15–22.

Budiono, Suhartana, Gunawan. 2009. untuk adsorpsi fenol. Skripsi. Pengaruh aktivasi arang tempurung kelapa dengan asam sulfat dan asam fosfat Universitas Diponegoro.

Cifriadi, A and Maspanger, D.R. (2005). Sifat teknis vulkanisat sol sepatu karet alam menggunakan bahan pengisi abu terbang. Prosiding Seminar Nasional Teknologi lnovalif Pascapanen untuk Pengembangan lndustri Berbasis Pertanian. Fakultas Teknologi Pertanian, IPB, 7 -8 September 2005. Hal. 701- 708.

Daud, W.M.A., Ali, W.S.W. (2004). Comparison of pore development of activated carbon produced from palm shell and coconut shell. Bioresource Technology. 93:63–69.

Daud, S., Ismail, H., dan Bakar, A.A. (2017). A study on the curing characteristics, tensile, fatigue, and morphological properties of alkali-treated palm kernel shell-filled natural rubber composites. BioResources. 12(1) :1273-1287.

Debapriya, D., Prabir, K.P., Madhusudan, R and Satyaban, B. (2013). Reinforcing effect of reclaim rubber on natural rubber/poly butadiene rubber blends. Materials and Design. 46 : 142-150.

Handayani, H. (2013). Pengaruh Berbagai Jenis Penggumpal Padat terhadap Mutu Koagulum dan Vulkanisat Karet Alam. Jurnal Penelitian Karet. 32 (1) : 74 – 80.

Hasan, A., Rochmadi., Sulistyo, H., dan Honggokusumo, S. (2012). The Effect of Rubber Mixing Process on The Curing Characteristics of Natural Rubber. Makara, Teknologi. 16(2): 109-115.

Herminiwati dan Yuniari. A. (2010). Penggunaan precipitated calcium carbonat (PPC) sebagai filler untuk karet sol sepatu olahraga. Majalah Kulit, Karet dan Plastik. 26(1) : 25 – 32.

Ismail, H., Edyham, M.R, Wirjosentono, B. (2002). Bamboo fibre filled natural rubber composite : The effects of filler loading and bonding agent. Polymer Testing. 21: 139 – 144.

Krisdianto, G. Sumarni, dan A. Ismanto. (2000). Sari Hasil Penelitian Bambu. Departemen Kehutanan. Jakarta.

Kumar, R.P., Amma, G., Tomas, S. (1995). Short sisal fiber reinforced styrene-butadiene rubber composites. Journal of Applied Polymer Science .58 : 597-612.

Manna, A.K., De P.P., dan D.K. Tripathy. (1997). Chemical Interaction between Surface Oxidizided Carbon Black and Epoxidized Natural Rubber. Rubber Chemical Technology. 70(4): 624-633.

Maridass, B.; Gupta, B.R. (2006). Effect of carbon black on devulcanized ground rubber tire—natural rubber vulcanizates: Cure characteristics and mechanical properties. Journal of Elastomers Plastics. 38 : 211–229.

Meng, X., Zhang, Y., Lu, J., Zhang, Z., Liu,L and Chu, P.K. (2013). Effect of Bamboo Charcoal Powder on the Curing Characteristics, Mechanical Properties, and Thermal Properties of Styrene–Butadiene Rubber with Bamboo Charcoal Powder. Journal of Applied Polymer Science. 2013. 1 – 8.

Ojinmah, N., Uchechukwu, T.O., Ezeh, V.O and Ogbobe, O. (2017). Studies on the effect of rice husk semi-nano filler on the mechanical properties of epoxidized natural rubber composite. European Journal of Advances in Engineering and Technology. 4 (3): 164-171

Onyeagoro. G.N. (2012). Cure characteristics and physico-mechanical properties of carbonized bamboo fibre filled natural rubber vulcanizates. International Journal of Modern Engineering Research. 2(6): 4683-4690.

Prasetya, H.(2017). Bahan pengisi sumber daya alam lokal dalam pembuatan vulkanisat seal tutup radiator. Jurnal Dinamika Penelitian Industri. 28(2): 131-137.

Rijali, A., Usman, M dan Zulkarnain. (2015). Pembuatan dan Karakterisasi karbon aktif dari bambu betung dengan aktivasi menggunakan activating agent H2O. Jurnal FMIPA. 2(1):102 - 107.

Roslan, S.A.H., Rasid, Z.A and Hassan, M.Z. (2015). The natural fiber composites based on bamboo fibers: A review. Journal Of Engineering and Applied Sciences. 10(15) : 6279-6288

Vught, F.A, Noordermeer, J.W.M, Datta, R.N. (2003). Durability of rubber products. Disertasi. Universiteit Twente. Netherlands.

Wei, L. (2008). Effects of Carbonization Temperatures on Characteristics of Porosity in Coconut Shell Chars and Activated Carbons Derived from Carbonized Coconut Shell. Industrial Crops and Products. 28 (2) : 190–198.




DOI: http://dx.doi.org/10.28959/jdpi.v29i2.3949

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Dinamika Penelitian Industri

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.