NATURAL RUBBER MODIFICATION FOR UPPER LAYER OF RUBBERIZED ASPHALT PAVING BLOCK AS SHOCK ABSORBER

Nasruddin Nasruddin

Abstract


The research of rubber compounding modification for upper layer of rubberized asphalt paving block as shock absorber using natural rubber, styrene butadiene rubber (SBR) as synthetic rubber, fly ash as filler and also vegetable oil as plasticizer has been conducted. The research design was varying the filler Si-69, fly ash and palm oil. The five formulas A, B, C, D, and E designed by varying the amount of Si-69 (48.5; 50.75; 53.00; 55.25; and 57.50) phr; coal fly ash (4.75, 7.00, 9.25, 11.50 and 13.75) phr; and vegetable oil from palm oil (6.5, 7.0, 7.5, 8.0, 8.5, and 9) phr, while the NR:SBR was 82.50: 17.50 phr for each formula. Based on the testing results, the formula D has the best physic-mechanical properties among others. It has specific gravity 1.78 g/cm3; hardness 81 ShoreA; abrasion resistance 52,85 mm3 ; compression set, 25% defl, 70oC, 22h: 21,40%; tensile strength 195,69 N/ m3; ozone resistance showed no crack.


Keywords


fly ash, natural rubber, rubber impact damper, vegetable oil, silica

Full Text:

PDF (Indonesian)

References


Abad, L.V., L.S. Relleve, C.T. Aranilla, A.K. Aliganga, C.M.S. Diego, A.M.D. Rosa. (2002). Natural Antioxidants for Radiation Vulcanization of Natural Rubber Latex. Polymer Degradation and Stability 76 (2002) 275–279.

Ahmed, F.S., M. Shafy, A.A.A. El-Megeed, and E.M. Hegazi. (2012). The effect of γ-irradiation on Acrylonitrile–Butadiene Rubber NBR Seal Materials With Different Antioxidants. Materials and Design, 36 : 823-828.

Ahmed, J.K., M.H. Al-Maamori, and H.M. Ali. (2015). Effect of Nano Silica on the Mechanical properties of Styrene-butadiene rubber (SBR) composite. International Journal of Materials Science and Applications 2015; 4(2-1): 15-20.

Ahmad, I, dan P.A. Mahanwar, (2010), Mechanical Properties of Fly Ash Filled High Density Polyethylene. Journal of Minerals and Materials Characterization and Engineering, 9(3): 183-198.

Al-Hartomy, OA., A.A. Al-Ghamdi , S.F. Al-Said, N. Dishovsky , M. Mihaylov, and P. Malinova. (2015). Comparative Study of The Dynamic Properties of Natural Rubber Based Composites, Containing Carbon-Silica Dual Phase Fillers Obtained By Different Methods. Journal of Chemical Technology and Metallurgy, 50(5): 567-576.

Alkadasi, N.A.N., D.G. Hundiwale, and U.R. Kapadi. (2004). Studies on The Effect of Silane Coupling Agent (2.0 per cent) on The Mechanical Properties of Flyash Filled Polybutadiene Rubber.

Journal of Scientific and Industrial Reaserch, Vol 63, July 2004, pp 603-609.

AL-Nesrawy, S.H., M. Al-Maamori, A.S.Hassani, and H.I. Jaafar (2014). Effect of mixture of Reclaimed tire and Carbon Black Percent on the Mechanical properties of SBR/NR blends. International Journal of Advanced Research, 2(3): 234-243.

Al-Maamori, M., S. Al-Nesrawy., and A. Hasaani. (2014). Aging Effect on Hardness of SBR/NR/BR, SBR/NR Composites by using Industrial Scraps as a Filler. Australian Journal of Basic and Applied Sciences, 8(17): 579-584.

Bazgir, S., A.A. Katbab, dan H. Nazockdast. (2004). Silica-Reinforced Dynamically Vulcanized Ethylene–Propylene–Diene Monomer/Polypropylene Thermoplastic Elastomers: Morphology, Rheology, and Dynamic Mechanical Properties. J Appl Polym Sci 92: 2000–2007.

Botros, S.H., F.F. El-Mohsen, and E.A. Meinecke. (1987). Effect of Brown Vulcanized Vegetable Oil on Ozone Resistance, Aging, and Flow Properties of Rubber Compounds. Rubber Chemistry and Technology. March 1987, Vol. 60, No. 1, pp. 159-175.

Bradshaw, A.S., C.D.P. Baxter., G. Tsiatas., A. Marinucci., J. Ressler., and R. Morgan. (2006). Simple Dynamic Model for Fender Pile Analysis and Design. DOI: 10.1061/(ASCE)0733-950X(2006)132:5(419).

Chandrasekara, G., M.K. Mahanama, D.G. Edirisinghe, and L. Karunanayake. (2011). Epoxidized Vegetable Oils as Processing Aids and Activators in Carbon-Black Filled Natural Rubber Compounds. J. Natn. Sci. Foundation Sri Lanka 39 (3): 243-250.

Chandran, V., T.M. RAJ, and T. Lakshmanan. (2016). Effect of Recycled Rubber Particles and Silica on Tensile and Tear Properties of Natural Rubber Composites. Materials Science (Medžiagotyra). 22(2): 256-261.

Christina, M., Bahruddin, dan Z. Helwani. (2014). Pengaruh Kadar Asam Stearat, Mercapto Dibenzothiazyl Disulfide (MBTS), dan Sulfur Terhadap Sifat, dan Morfologi Thermoset Rubber dengan Filler Carbon Black-Abu Terbang Sawit. JOM FTEKNIK. 1(2); 1-11.

Chuan S.T., and L.C. Keong. (2016). Effects of Calcined Clay/Characteristics and Mechanical Properties Compound. Australian Journal of Basic and Applied Sciences, 10(14): 152-161.

Dasgupta, M., S. Kar, S.D. Gupta, R. Mukhopadhyay, and A. Bandyopadhyay. (2013). Effect of Fly Ash as Filler in Rubber-A Comprehensive Study of the Vulcanisate Properties of StyreneButadiene Rubber Compounds. Progress in Rubber, Plastics and Recycling Technology, 29(3): 151-167.

Egwaikhide, A.P., Okieimen, F.E, and U. Lawal. (2013). Rheological and Mechanical Properties of Natural Rubber Compounds Filled with Carbonized Palm Kernel Husk and Carbon Black (N330). Science Journal of Chemistry. 1(5): 50-55.

Gummadi J., G.V. Kumar, and G. Rajesh. (2012). Evaluation of Flexural Properties of Fly Ash Filled Polypropylene Composites. International Journal of Modern Engineering Research (IJMER), 2(4): 2584-2590.

Igwe, I.O, dan A.A Ejim. (2011). Studies on Mechanical and End-Use Properties of Natural Rubber Filled with Snail Shell Powder. Materials Sciences and Application. 2: 802-810

Ivanova, T.S., Z. Panov, K. Blazev, and V.V. Paneva. (2011). Investigation of Fly Ash Heavy Metals Content and Physico Chemical Properties from Thermal Power Plant, Republic of Macedonia. International Journal of Engineering Science and Technology (IJEST), 3(12): 8219-8225.

Jean, E., and W. Jian-hua. (2015). Analysis of Angular Side Berthing Against a Rubber Cone Fender. J. Shanghai Jiaotong Univ, 20(5): 571-583.

Kenechi N.O., A. Felix, C. Linus, and A. Kayode. (2015). Analysis on the Physicochemical Properties of Palm Oil Within Isialangwa Local Government Area of Abia State, Nigeria. International Journal of Bioorganic Chemistry. 2(3): 159-162.

Koushki, M., M. Nahidi, and F. Cheraghali. (2015). Physico-chemical Properties, Fatty Acid Profile and Nutrition in Palm Oil. Journal of Paramedical Sciences (JPS), 6(3): 117-134

Manjang, S., R.P. Putera, Y.S. Akil, and I. Kitta. (2015). Electrical and Mechanical Properties of Fly Ash Filled Silicone Rubber for High Voltage Insulator. ARPN Journal of Engineering and Applied Sciences, 10(17): 7320-7327.

Nandanan, V. (2000). Studies on the Use of Drying Oils as Ingredients in the Vulcanization of Elastomers (Thesis). Cochin University of Science and Technology, India.

Onyeagoro, G.N. (2012). Effect Of Zinc Oxide Level And Blend Ratio on Vulcanizate Properties of Blend of Natural Rubber And Acrylonitrilebutadiene Rubber In The Presence Of Epoxidized Natural Rubber. Journals, savap 3(1): 499-509.

Ozsoy, I., Demirko, A. Mimaroglu, H. Unal, dan Z. Demir. (2015). The Influence of Micro-and Nano-Filler Content on the Mechanical Properties of Epoxy Composites. Journal of Mechanical Engineering. 61(10): 601-609.

Peng, Z., L.X. Kong, S.D. Li, Y. Chen, and M.F. Huang. (2007). Self-Assemled Natural Rubber/Slica Nanocomposites: Its Preparation and Characterization. Composites Science and Tschnology, 67(15-16): 3130-3139.

Pongdong, W., C. Nakason, C. Kummerlöwe, dan N. Vennemann. (2015). Influence of Filler from a Renewable Resource and Silane Coupling Agent on the Properties of Epoxidized Natural Rubber Vulcanizates. Journal of Chemistry, 2015, pp 1-15.

Raja. R.S., K. Manisekar, and V. Manikandan. (2013). Effect of Fly Ash Filler Size on Mechanical Properties of Polymer Matrix Composites. International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME). 1(1): 34-38.

Salehi, M.H., T. Khalkhali and A. Davoodi. (2014). Synergistic Effect of Silica with Carbon Nanotubes, Nanoclays and Whiskers on Physical and Mechanical Properties of Elastomeric Compounds Based on NBR. European Journal of Advances in Engineering and Technology, 2014, 1(2): 85-88.

Samarth, N.B., dan P.A. Mahanwar. (2015). Modified Vegetable Oil Based Additives as a Future Polymeric Material-Review. Open Journal of Organic Polymer Materials, 2015, 5, 1-22 Published Online January 2015 in SciRes. http://www.scirp.org/journal/ojopm http://dx.doi.org/10.4236/ojopm.2015.51001. Diakses tanggal 5 Desember 2016.

Sarkawi, S.S., A.K.C. Aziz, R.A.Rahim, R.A Ghani, and A.N. Kamaruddin. (2016). Properties of Epoxidized Natural Rubber Tread Compound: The Hybrid Reinforcing Effect of Silica and Silane System. Polymers & Polymer Composites, 24(9): 775-782.

Singh, G., A. Mahajan, and M. Kumar. (2015). A Review Paper on Vulcanization of Rubber And It’s Properties. Global Journal of Engineering Science and Researches. 2(8): 1-4.

Thomasa, O., V.N. N. Namboothiria, R.J.O. Thomasa, V.N. N. Namboothiria, and R. Joseph. (2016). Feasibility of Silica Loaded NBR as Lining Material for Impactive Gripper. Procedia Technology 25 (2016 ) 900 – 907.

Ugbaja, M.I., K.I. Ejiogu, and J.D. Dashe. (2016). The Impact of the Bark of Camel’s Foot (Piliostigmathonningii) on the Physico-Mechanical Properties of Natural Rubber Vulcanizate. Journal of Energy, Environmental & Chemical Engineering 2016; 1(1): 19-23

Ulfah, I.M., R. Fidyaningsih, S. Rahayu, D.A. Fitriani, D.A. Saputra, D.A. Winarto, and L.A. Wisojodharmo. (2015). Influence of Carbon Black and Silica Filler on the Rheological and Mechanical Properties of Natural Rubber Compound. Procedia Chemestry 16: 258-264.

Wang, J, and D. Chen. (2013). Mechanical Properties of Natural Rubber Nanocomposites Filled with Thermally Treated Attapulgite. Journal of Nanomaterials, Volume 2013, Article ID 496584, 11 pages

Yatsuyanagi, F., N. Suzuki, M. Ito, and H. Kaidou. (2002). Effects of Surface Chemistry of Silica Particles on the Mechanical Properties of Silica Filled Styrene-Butadiene Rubber Systems. Polymer Journal, Vol. 34, No. 5, pp 332-339.

Zala, M.S., and K.J. Motwani. (2015). A Review on Design Analysis and Optimization of Parallel Motion Fender. International Journal for Scientific Research & Development. 2(11): 105-107.

Zikra, M., K. Sambodho, T. A. Manan., and Y. Mulyadi. (2016). Design And Modeling Fender System For Condensate And Sulphuric Acid Jetty At Senoro Field, Central Sulawesi. ARPN Journal of Engineering and Applied Sciences. 11(2): 896-900.




DOI: http://dx.doi.org/10.28959/jdpi.v28i2.3093

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Jurnal Dinamika Penelitian Industri

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.