ENGINEERING OF ABSORPTION COLUMN AND THE ADSORBENT FROM FERRO POWDER WASTE FOR PURIFICATION THE BIOGAS FROM PALM OIL MILL EFFLUENT

siti masriani rambe, Edwin Harianto Sipahutar

Abstract


Abstract

It was conducted to engineering the adsorption column by using ferro powder waste as adsorbent to removal the H2S content of biogas from Palm Oil Mill Effluent. The first step it was conducted to calculated the adsorption column as purification column by character Palm Oil Mill Effluent (POME) considering. Further, is was conducted to annealed the ferro powder from industrial waste workshop in north Sumatera. Thus, it was conducted to annealed with temperature variation (800°C, 900°C and 1000°C) and the thick adsorbent (1 cm, 2 cm).The  result shows that  each adsorbent product is tested by applied of using direct that  puts in the  adsorbent  column. Applied research is conducted by flowing biogas trought column that the adsorbent is alreadyin the column. Temperature condition and the width of adsorbent was effecting of adsorption the H2S biogas and the optimal condition are 1000°C temperature and 2 cm of width adsorbance

Keywords


Biogas, Adsorption, Adsorbent, Ferro powder Waste, Palm Oil Mil Effuent

Full Text:

PDF (Indonesian)

References


Aditya, Kusuma, Pricilia Melisa dan Agus Hadiarto. (2012), Pemurnian Biogas dari Kandungan H2S dengan NaOH, CuSO4 dalam packed Column secara Kontinyu. Jurnal Teknoogi Kimia dan Industri. 1(1)

Al Mamum Muhammad Rashed, Shuichi Torii. (2015). Removal of Contaminant Gases from Biogas by Chemical Purificatin Processes. IPASJ International Journal of Mechanical Engineering (IIJME). 3(10). ISSN 2321-6441.

Apriyanti Eny. (2012). Adsorpsi CO2 menggunakan Zeolit: Aplikasi pada Pemurnian Biogas. Jurnal Universitas Pandanaran. 10(23).

Boateng ofori, E.M Kwofie. (2009). Water Scrubbing: Abetter Option for Biogas Purification for Effective Storage. World Applied Science Journal 5: 122-125. ISSN 1818-4952.

Deublein, D. dan Steinhauster, A. (2008). Biogas from Waste and Renewable Resources. An Introduction. WILEY-VCH Verlag Gmbh & Co. KgaA. Weinheim.

Hamidi, Nurkholis, I.N.G. Wardana, dan Denny Widhiyanuriyawan. (2011). Peningkatan Kualitas Bahan Bakar melalui Proses Pemurnian dengan Zeolit Alam. Jurnal Rekayasa Mesin. 2(3).

Hery Achmad Fauzan, Zamzami Septieropa, Selly Rainsyah dan Faizal Romadhi. (2011). Pemanfaatan Biogas/Landfillgas sebagai bahan bakar Mesin Bensin 1 Silinder 4 Langkah. Jurnal Teknik Industri. 12(2). Agustus 2011;162-168

Irvan, Bambang Trisakti, Vivian Wongistani dan Yoshimasa Tomiuchi. (2012). Methane from Digestion of Palm Oil Mill Effluent (POME) in a Thermofilic Anaerobic Reactor. International Journal of Science and Engineering. 3(1): 32-35.

J.I Huertas, N. Giraldo and S Izquirerdo (2011). Removal of H2S and CO2 from biogas by Amine Absorpsion” Automotive Engineering Research Centre-CIMA of Technology. Mexico.

Kementerian Perindustrian (2011). Booklet Hilirisasi Industri Kelapa Sawit. Kementerian Perindustrian, Jakarta. Diakses http://kemenperin.go.id/ pada tanggal 22 Mei 2012.

Listyowati Anggraini F.P., Wirakartika M.,S.R. Juliastuti dan nunik Hendrianie. (2012). Penurunan Kadar CO2 dan H2S pada biogas dengan metode adsorpsi menggunakan zeolit alam. Jurnal Teknik Pomits. 1(1).

Maiya Djeine C Schiavon, Fernando H Cardoso, Lercio M Frare, Marcelino L Gimenes, Nehemias C Pereira. (2014). Purification of Biogas for Energy Use. Chemical Engineering Transactions. AIDIC The Italian Association of Chemical engineering. ISSN 2283-9216.

Negara, K.M.T, Tjokorda G.T.N, I Made S, I ketut A.A, Dewa N.K.P.N, I Wayan S, A.A.I.A.sri K. (2012). Pemurnian Biogas dari Pengotor Hidrogen Sulfida(H2S) dengan Memanfaatkan Limbah Geram Besi Proses Pembubutan, Jurnal Energi dan Manufaktur. 5(1). Oktober 2012:1-97

N.H.S Rays, MK Mohanty, RC Mohanty. (2013). A Study on Application of Biogas as Fuel in Compression Ignition Engineering. International Journal of Innovation in Engineering and Technology (IJIET). 3. Issued 1 October 2013. ISSN: 2319-1053.

Paolo Cosoli, Marco Ferrone, Sabrina Pricl, Maurizio Fermeglia. (2008). Hydrogen sulphide removal from biogas by zeolite adsorption Part I. GCMC molecular simulations. Chemical Engineering Journal. Elsevier.

Pulkrabek, Willard W. (1997). Engineering Fundamentals Of The Internal Combustion Engine. Prentice Hall. New Jersey.

Slawomir Wierzbicky. (2012). Biogas As a Fuel For Diesel Engines. Olsztyn.

Svenskt Gastekniskt Center AB. 2012. Basic Data On Biogas. 2nd edition. Sweden.

Smieja Michael, Slawoir Wierzbicki. (2014). Influence of Content of Methane in Biogas on Emission of Toxic Substances in Diesel Engine Supplied With Bifuel. The 9th Conference Environmental Engineering. Poland.

Tippayawong, N. Promwungkwa, A. Rerrkriangkrai. (2011). Long Term Operation of a small biogas/diesel dual-fuel engine for on-farmelectricity generation. Chiang Mai University.Thailand.

Towler Gavin dan Ray Sinnott, 2008. Chemical Engineering Design. Principles, Practice and Economic of Plant and Process Design, Elsevier Inc, ISBN 13:978-0-7506-8423-1.

Yoo Dongsun, Ilgon Kim, Sangsoo Kim, Chang Hie Hahn, Changyu Lee, Seongjin Cho. (2007). Effects of annealing temperature and method on structural and optical properties of TiO2 films prepared by RF magnetron sputtering at room temperature. Applied Surface Science, ScienceDirect. Elsevier.




DOI: http://dx.doi.org/10.28959/jdpi.v28i2.2983

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Jurnal Dinamika Penelitian Industri

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.