KARAKTERISTIK SIFAT MEKANIK SOLID TYRE DENGAN BAHAN PENGISI DAN PELUNAK BERBASIS SUMBER DAYA ALAM LOKAL
Abstract
The objective of research was to study the mechanical properties of solid tyre which was made by using local fillers namely silica extracted from quart sand, coal fly ash, kaolin as well as used cooking oil as softener. Solid tyre were made through mastication, vulcanization, and molding. The Solid tyre comprising 5 (five) formulas namely Formula A, B, C, D, and formula E. The mechanical properties of the solid tyre of each treatment were compared with the mechanical properties of the solid tyre originating from imports (F*). Testing of mechanical properties for each treatment were made 3 (three) replications. Test result showed that the mechanical properties of formula B was comparable to the imported solid tyre in term of hardness 76 shore A; Tensile strength of 133.91 kg / cm2; Modulus 200% was 23.64; Elongation at break 562%; Tear strength 64.88 kg.c-1; Specific gravity 1.23; Abrassion resistance (DIN) 108.25 mm3; Compression set at 25% defl, 70oC, 22h was 73,43; Ozone resistance (50 pphm 20% strain 24 h 40oC) was no crack; and tensile strength after aging (70oC, 24 h) 120.18 kg / cm2.
Keywords
Full Text:
PDF (Indonesian)References
Alnawafleh. M.A, 2009. Mechanical and Physical Properties of Silica Bricks Produced from Local Materials. Australian Journal of Basic and Applied Sciences, 3(2): 418-423.
Andriyanti, A., Darsono, dan W. Faisal, 2010. Kajian Metode Vulkanisasi Lateks Karet Alam Bebas Nitrosamin Dan Protein Alergen. Prosiding PPI – PDIPTN, Yogyakarta, 20 Juli 2010. Halaman, 161 – 169.
Ansarifar, M.A., Jatinder, P. Chugh, dan S. Haghighat, 2000. Effects of Silica on the Cure Properties of Some Compounds of Styrene-butadiene Rubber. Iranian Polymer Journal, 9 (2), 81-87.
Aprem, A., S. Thomas, K. Joseph, N.M. Barkoula dan J.K. Kocsis, 2003. Sulphur Vulcanisation of Styrene Butadiene Rubber using New Binary Accelerator Systems. Journal of Elastomers and Plastics Vol. 35, hal 29 – 55.
Arioz, E., Ö. Arioz, dan Ö. M. Koçkar, 2013. Mechanical and Microstructural Properties of Fly Ash Based Geopolymers. International Journal of Chemical Engineering and Applications, 4(6) 397-400
Arsitika, W.P, dan D. Irwanto, 2015. Simulasi Pengukuran Suhu dan Kecepatan pada Open Mill. Prosiding Seminar Nasional Kulit, Karet, dan Plastik ke-4 Yogyakarta, 28 Oktober 2015. Hal. 197 - 212
Baharuddin, Sumarno, G. Wibawa dan N. Soewarno. 2007. Morfologi dan Properti Campuran Karet Alam/Polypropylene yang Divulkanisasi Dinamik dalam Internal Mixer. Reaktor, Vol. 11(2), 71-77.
Bahruddin, I. Zahrina, dan S.Z. Amraini, 2010. Pengaruh Filler Carbon Black Terhadap Sifat dan Morfologi Komposit Natural Rubber/Polypropylene. Jurnal Teknik Kimia Indonesia, Vol. 9(2), 62-68.
Bijarimi. M., H. Zulkafli dan M. D.H. Beg, 2010. Mechanical Properties of Industrial Tyre Rubber Compounds. Journal of Applied Sciences, 10: 1345-1348.
Bijrami, M., H. Zulkafli, dan MDH Beg, 2010. Mechanical Properties of Industrial Tyre Ruber Compounds. J. Applied Sciences, 10(13) 1345-1348.
Brockner, R. 1970. Properties and structure of vitreous silica. I. Journal of non-crystalline solids 5 (1970) 123-175.
Cifriadi, A, dan Maspanger, D.R. 2005. Sifat Teknis Vulkanisat Sol Sepatu Karet Alam Menggunakan Bahan Pengisi Abu Terbang Batubara. Prosiding Seminar Nasional Teknologi Inovatif untuk Pengembangan Industri Berbasis Pertanian. Balai Besar Penelitian dan Pengembangan Pascapanen Petanian, Hal, 701-708.
Cinaralp. F, dan L. Zullo. 2012. Reinforcig Fillers in The Rubber Industry, Assesment as Potensial Nanomaterials with a Focus on Tyres. Eroupean Tyre and Rubber Manufacturers Assosiation. Hal 1-13.
Fitriani, K.I, dan D. Prasetyoko. 2014. Sintesis Silika Tersulfat dari Kaolin Bangka Belitung. Jurnal Sains dan Seni Pomits, 2 (1), 1-7.
Garinas, W. 2009. Karakteristik Bahan Baku Kaolin Untuk Bahan Pembuatan Badan Isolator Listrik Keramik Porselen Fuse Cut Out (FCO). Jurnal Sains dan Teknologi Indonesia, 11(2), 120-125.
Ghofur, A., Atikah, Soemarno, A. Hadi, 2014. Karakterisasi Fly Ash Batubara Sebagai Bahan Katalitik Konverter Dalam Mereduksi Gas Buang HC Dan CO Kendaraan Bermotor. Prosiding SNST ke-5 Tahun 2014 Fakultas Teknik Universitas Wahid Hasyim Semarang.
Guessoum, M., S. Nekkaa, F.F. Rimlinger, dan N. Haddaoui, 2012. Effects of Kaolin Surface Treatments on the Thermomechanical Properties and on the Degradation of Polypropylene. International Journal of Polymer Science, Volume 2012, hal 1-9.
Hamzah, U., K.K. Learn, dan S. Rahim. 2010. Physical Properties and Chemical Composition of Segamat Kaolin, Johor Malaysia. Sains Malaysiana 39(1), 31–38.
Hasan, A, Rochmadi, H. Sulistyo, dan S. Honggokusumo, 2012. The Effect of Rubber Mixing Process on the Curing Characteristics of Natural Rubber. Makara, Teknologi, 16(2), 109-115
Iqbaldin, M.N.M., I. Khudzir, M.I.M. Azlan, A.G. Zaidi, B. Surani, dan Z. Zubri, 2013. Properties Of Coconut Shell Activated Carbon. Journal of Tropical Forest Science 25(4), 497–503.
Sitorus, I.M.S., Y. Widyanata, dan I. Surya, 2013. Pengaruh Penambahan Alkanolamida Terhadap Karakteristik Pematangan dan Kekerasan Vulkanisat Karet Alam Berpengisi Kaolin. Jurnal Teknik Kimia USU, 2(4), 38-42
Kato A., Y. Ikeda, Y. Kasahara, J. Shimanuki, T. Suda, T. Hasegawa, H. Sawabe, dan S. Kohjiya, 2008. Optical transparency and silica network structure in cross-linked natural rubber as revealed by spectroscopic and three-dimensional transmission electron microscopy techniques. Journal of the Optical Society of America, 25(10), 1602-1615.
Kesuma, R.F, B. Sitorus, dan Adhitiyawarman. 2013. Karakterisasi Pori Adsorben Berbahan Baku Kaolin Capkala dan Zeolit Dealuminasi. JKK, tahun 2013, halaman 19-23.
Kyotani, T. 2000. Control of Pore Structure in Carbon. Journal Elsevier, 38(2) 269-286
Lestiani, D.D., Muhayatun dan N. Adventini (2010). Karakteristik Unsur Pada Abu Dasar Dan Abu Terbang Batu Bara Menggunakan Analisis Aktivasi Neutron Instrumental. Jurnal Sains dan Teknologi Nuklir Indonesia Indonesian Journal of Nuclear Science and Technology Vol. XI, No. 1, Februari 2010: 27-34.
Márquez, J.M., J.Ma. Rincón, dan M. Romero, 2010. Effect of microstructure on mechanical properties of porcelain stoneware. Journal of the European Ceramic Society, 30 (15) 15, 3063-3069
Masyrukan, 2013. Karakterisasi Bahan Karet Untuk Keperluan Gasket Kendaraan Terhadap Pengaruh Kandungan Sulfur. Simposium Nasional RAPI XII - 2013 FT UMS. Hal. 87-94.
Munir, S. 2010. Penggunaan Bahan Pengisi Abu Terbang dalam Industri Karet. Prosiding SNaPP2010 Edisi Eksakta. Hal. 49-53.
Nabil, H., Ismail, H. and Azura, A. R, 2013. Compounding, mechanical and morphological properties of carbon-blackfiller natural rubber/recycled ethylenepropylene-diene-monomer blends, Polymer Testing, 32: 385-393.
Nurdiansah, H, dan D. Susanti. 2013. Pengaruh Variasi Temperatur Karbonisasi dan Temperatur Aktivasi Fisika dari Elektroda Karbon Aktif Tempurung Kelapa dan Tempurung Kluwak Terhadap Nilai Kapasitansi Electric Double Layer Capacitor (EDLC). Jurnal Teknik Pomits, 2 (1), 13-18.
Oh, J., Y.H. Yoo, I.S. Yoo, Y.I. Huh, T,K. Chaki, C. Nah. 2014. Effect of Plasticizer and Curing System on Freezing Resistance of Rubbers. Journal of Applied Polymer Science, 131(2), 1-8.
Peng, Y.K, 2007.The Effect of Carbon Balck and Silica Fillers on Cure Characteristics and Mechanical Propertis Properties of Breaker Componds. Thesis Submitted in Fulfillment of the Requirements for the degree Of Master of Science. University Science Malaysia.
Ramdja, A.F., L. Febrina, dan D. Krisdianto. 2010. Pemurnian Minyak Jelantah Menggunakan Ampas Tebu Sebagai Adsorben. Jurnal Teknik Kimia, 1(17), 7-14.
Satheesh R.R., K. Manisekar, dan V. Manikandan. 2013. Effect of fly ash filler size on mechanical properties of polymer matrix composites. International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME) Volume 1, Issue 1 (2013) ISSN 2320–4060 (Online)
Singh, G., A. Mahajan, M. Kumar, 2015. Comparative Study of Tyre Rubber and V-Belt Rubber: Composition and Mechanical Properties. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE). 12(5) : 60-65.
Winya, N, dan N. Pittayaprasertkul, 2015. SiO2 Reinforcement of Mechanical Properties for Ebonite from Natural Rubber. International Journal of Chemical Engineering and Applications, 6(3), 169-172.
Yuniati, I.S. Cebro, dan Nurlaili, 2013. Pengaruh Bahan Pengisi Karbon Tempurung Kelapa Dan Karbon Sintetis Terhadap Sifat Mekanis Produk Latex. Proceeding Seminar Nasional Tahunan Teknik Mesin XII (SNTTM XII), Universitas Lampung, Bandar Lampung, 23-24 Oktober 2013. Hal, 1 – 5.
Zafarmehrabian. R., S.T, Gangali, M.H.R. Ghoreishy, dan M. Davallu.. 2012. The Effects of Silica/Carbon Black Rasio on The Dynamic Properties of The Tread Compounds in Truck Tires. E-Journal of Chemistry, 9(3), 1102-1112.
DOI: http://dx.doi.org/10.28959/jdpi.v28i1.2235
Refbacks
- There are currently no refbacks.
Copyright (c) 2017 Jurnal Dinamika Penelitian Industri
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.