ENGINEERED OVEN AS AN ALTERNATIVE METHOD ON STAMP CANTING SOLDERING PROCESS

I Made Arya Utamaningrat, Robets Christiawan, Suparjo Suparjo, Hadi Sumarto, Farida Farida

Abstract


Batik is a process of attaching wax onto a fabric to block color from entering it. This process is done using a tool called canting. There are two kind of canting, writing canting and stamp canting, that is respectively use to make written batik and stamp batik. Stamp canting was made to accelerate the process of making batik fabric, while maintaining the standard of batik itself. It was made using copper that is stack in certain way and burned on a pile of charcoal to make sure the adhesive material (patri) melt. This research aims to accelerate the process of soldering stamp canting using engineered oven instead of using charcoal. the oven engineered in this research uses Liquid Petroleum Gas (LPG) as its main source of heat. It was made not only to accelerates the process, but also to make sure the consistency of the heat along the process of burning which will directly affecting the end product of stamp canting. The method used in this research includes: literature studies, field studies, oven engineering, making canting samples, test, and reporting. The result of this research shows that the oven is able to work and melt the standardized patri on stamp canting.


Keywords


Stamp Canting, Oven, soldering, Batik

Full Text:

PDF

References


BSN. (2014). SNI 0239:2014, Batik - Pengertian dan Istilah, 1–7.

Hamidi, K., Wibisono, M. A., & Dharma, I. G. B. B. (2017). Pengembangan Canting Cap Berbahan Plastik Menggunakan Teknologi Additive Manufacturing. Prosiding Seminar Nasioanl Teknik Industri Universitas Gadjah Mada 2017, (November), 66–75.

Harris, J. W. (2005). US 2005/0249629 A1. United States.

Harrisproductsgroup. (n.d.). Harris Brazing Alloy. Retrieved November 13, 2020, from https://www.harrisproductsgroup.com/en/Products/Alloys/Brazing/Phos-Copper/Harris-0.aspx

Hastuti, L. S. S. (Balai B. K. dan B. (2010). Tinjauan Tekno Ekonomi Cap Batik Dari Bahan Kayu. Dinamika Kerajinan Dan Batik, 27(1), 9–20.

Hermawan, I., & Suwondo, A. (2014). Bahan Alternatif Pembuatan Canting Batik Cap (Cbc), 25–31.

Ikawanty, B. A., Rifa’i, M., & Patma, T. S. (2015). Otomatisasi Canting Listrik untuk Pembuatan Batik Tulis Probolinggo [Electric Canting Otomation for Hand Drawn Batik of Probolinggo]. Prosiding SENTIA 2015 – Politeknik Negeri Malang, 7.

Lestariningsih, S., Dharmastiti, R., & Moyoretno, B. (2013). Evaluation of Electrical Canting (Cantrik lama) as the Basis for Improvement Electrical Canting (Cantrik) Development. Dinamika Kerajinan Dan Batik: Majalah Ilmiah, 30(1), 53–66. https://doi.org/10.22322/dkb.v30i1.952

Nurohmad, & Eskak, E. (2019). LIMBAH KERTAS DUPLEXUNTUK BAHAN CANTING CAP BATIK. Dinamika Kerajinan Dan Batik: Majalah Ilmiah, 36(1), 81–94. https://doi.org/10.22322/dkb.V36i1.4149

Oentoro, K., Amijaya, S. Y., & Seliari, T. (2019). Analisis Pengembangan Wirausaha Batik Tradisional, 3(1), 1–7.

Sangaji, B. (2017). Life Cycle Impact Assessment Produk Canting Cap Batik.

Setiawan, J., Eskani, N., Besar, B., Yogyakarta, B., Kusumanegara, J., & Yogyakarta, N. (2020). Proses Electroforming Tembaga pada Bahan Acrylic untuk Prototype Canting Cap Batik, (2014), 14–15.

SKKNI. Penetapan Standar Kompetensi Kerja nasional Indonesia Kategori Industri Pengolahan Golongan Pokok Industri Tekstil Bidang Industri Kain Batik (2018). Kementerian Perindustrian.

Syamsuri, H., & Abidin, Z. (2016). Re-desain canting listrik untuk meningkatkan produktivitas pengrajin batik ciamisan. Jurnal Media Teknologi, 03(01), 71–83.

Yanuarmi, D., Widdiyanti, W., & Sundari, S. (2019). Kreatifitas Melalui Batik Cap Dari Karton Bekas Pada Siswa Disabilitas.

Batoboh, 4(2), 69. https://doi.org/10.26887/bt.v4i2.899

Zahidi, M. S. (2017). Batik as Indonesian public diplomacy in Asean economic. International Journal of International Relations, Media and Mass Communication Studies, 3(2), 1–9.




DOI: http://dx.doi.org/10.22322/dkb.v38i1.6646

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 I Made Arya Utamaningrat

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

 Dinamika Kerajinan dan Batik : Majalah Ilmiah indexeed by :